Replace a ceiling light fitting

Tag : Needle Nose Pliers

1. Shut off the power to the appropriate circuit at the main panel.

2. Remove the old unit. As you do so, examine how the old fixtureis attached. The most common way to secure is with bolts to astrap. Strap mounting works best with lightweight fixtures.

3. Prepare the new wires. Strip 5mm of insulation from new leads.If wires are the stranded type, twist bare ends slightly.

4. Secure the fixture to the ceiling.

5. Make the electrical connections once you're sure the fixture ismechanically secure. Then carefully coil up wires inside the box.

6. Check your installation by turning on the power. If the fixturelights up, shut off power again and raise and secure the canopy.

DIY Tips:
As you remove the old fixture, take care not to undo otherconnections that you may find in the box.

Handle fixtures gently - most are made of lightweight metal thatcan be bent easily.